BMW M340i

I'm reporting a safety issue with BMW vehicles equipped with the B58TU engine, primarily 2019-2021 models. These vehicles have an oil pump with an internal plastic component that regulates oil pressure, and this part is fracturing in the field, causing sudden loss of oil pressure. The failure typically occurs during cold starts in low temperatures. When it fails, oil pressure becomes erratic or is lost entirely, often with little to no warning before engine damage or vehicle disablement.…

Plastic components in the oil pump went out. BMW has made new oil pumps with metal components that are less fragile and do not fail as often. Outside of warranty these repairs can be very costly. I have had to pay out of pocket for these repairs myself. I do not understand why this is not a recall.

While parallel parking in a parking structure; my car accelerated full throttle backing up hitting the back wall ; then I tried going forward to straighten the car up, it accelerated full throttle forward hitting the front wall. I had an doctors appt. there and decided to still straighten car and I said if it goes full throttle again I would immediately put the car in neutral and turn the car off, which I did. Each time the car went full throttle I hit the brake pedal as hard as I can…

I was driving and going to pickup something from the store localy around like 8 pm, and suddenly my car's wheels stopped responding, and the sign's came up on the car of something like impaired driving , and the car was telling me to pull over, i was nearby walmart and i pulled into the parking lot slowly, and could not figure out what was wrong with my car, I left it there and went back next morning to find out that my Tie rod connecting my wheel to the steering rack had completely broken in…

I am reporting a safety concern involving BMW vehicles equipped with the B58 Technical Update (B58TU) engine, commonly found in model years 2019–2021. These vehicles utilize a variable-displacement engine oil pump containing an internal thermoplastic adjusting component responsible for regulating oil pressure. Field failures are increasingly being reported in which this internal component fractures, resulting in sudden loss or instability of engine oil pressure. The failure frequently occurs…

Oil pump for the 2020 model is made with plastic internals. The passage that controls the flow of oil into your engine is made of plastic. The car didn’t even have 40,000 miles and the plastic broke causing the passage to be in a very close to shut position not allowing enough oil to enter the engine in higher rpm. The mechanic told me this is the biggest thing he is starting to see and he works for BMW Service center of Mamaroneck. He’s seen over 150+ B58TU (engine model) of the year 2020 with…

I am reporting a premature oil pump failure on my 2020 BMW M340i xDrive with 42 thousand miles. The vehicle has been well maintained and has not experienced any oil pressure warning lights. However, the electronic engine oil level measurement repeatedly fails to complete once the engine is fully warmed up. I have also received stored BMW fault code 21B2C7 relating to engine oil pressure plausibility/excessive oil pressure. The fault currently shows as inactive, but it was not present…

Component Involved:Engine Mechanical / Variable-Displacement Engine Oil Pump (Part #11418635032 / Updated #11419895359) Description of Safety Hazard / Defect:The early-generation B58TU engine features a variable-displacement oil pump equipped with an internal thermoplastic (plastic) adjusting ring. Due to continuous thermal cycling and mechanical stress, this plastic ring is prone to cracking and shattering without warning.When this internal component disintegrates, it causes an immediate loss…

Safety Hazard: Oil Pump Failure Leading to Sudden Engine Stall (BMW B58TU engines) Description of Defect: The oil pump module in the 2020 BMW M340i (G20) and many other models between 2019-2020 contains internal plastic components that are prone to thermal degradation and premature failure. These plastic parts can crack or disintegrate, causing a sudden loss of oil pressure. BMW corrected this in later models with metal parts but failed to issue a recall or the older models containing plastic…

I am submitting this complaint regarding a potential safety defect involving the engine lubrication system on my 2020 BMW M340i with the B58 engine. The vehicle was purchased used from a single owner with low mileage and comprehensive maintenance records, with no indication of prior engine or lubrication issues. While traveling at highway speed, the vehicle suddenly displayed a low oil pressure warning and simultaneously entered a protective shutdown strategy, resulting in a significant loss of…